How to use air cushion machine?
- Categories:News
- Time of issue:2021-06-25 09:09
摘要：Air cushion machine is a kind of bubble filling equipment that uses plastic film as a cushioning material. Now it is popular among many industries. Many customers do not know how to use the air bubble machin. Sometimes, air cushion film machine runs off or jams due to incorrect operation for starter users. Now we will explain how to use the four air cushion packaging machine WIAIR currently on sale, WIAIR 1000, WIAIR 3000+, WIAIR 1200 and WIAIR 3800.
How to use air cushion machine?
摘要：Air cushion machine is a kind of bubble filling equipment that uses plastic film as a cushioning material. Now it is popular among many industries. Many customers do not know how to use the air bubble machin. Sometimes, air cushion film machine runs off or jams due to incorrect operation for starter users. Now we will explain how to use the four air cushion packaging machine WIAIR currently on sale, WIAIR 1000, WIAIR 3000+, WIAIR 1200 and WIAIR 3800.
- Categories:News
- Time of issue:2021-06-25 09:09
Air cushion machine is a kind of bubble filling equipment that uses plastic film as a cushioning material. Now it is popular among many industries. Many customers do not know how to use the air bubble machin. Sometimes, air cushion film machine runs off or jams due to incorrect operation for starter users. Now we will explain how to use the four air cushion packaging machine WIAIR currently on sale, WIAIR 1000, WIAIR 3000+, WIAIR 1200 and WIAIR 3800.
1.1 Remove the machine from the package box carefully.
1.2 Put the machine in the clean and flat working table,
2.1 Connect the correct electrical power.
2.2 Installation of film roll.
2.2.1 The bubble film should be cut with a scissors in the lower right corner before loading the film.
2.2.2 Put the roll film on the feeding roller properly. There is a groove inside the roll film header should align and feed into feeding roller’s protrusion part. The roll feeding direction to pass through to the tension column.
2.2.4 Threading roll film pass through the air nozzle.
2.2.5 Pulling the roll film to close enough and touch just right between the hot sealingwheels to ensure when push start button the machine can pull out film till reach the front pulling wheels, and start making air cushion smoothly.
2.3 Operations
2.3.1 Connecting the electrical power, and press the power switch .
2.3.1 After power on the machine, the power indicator red light will go on and green light start to flashing, the machine is under heating processing (The warm up time around 4 mins). then press the start / pause button to start.
2.3.2 When green light is solid on that mean machine is ready to making air cushion,
2.3.3 When finish making air cushion, press the start/pause button again, machine will stop immediately. There is a perforation line on the film to tear off the necessary length for your requirement.
2.3.4 Air density setting: Various cushion sizes are available to meet different packaging requirements, You can use the pressing setting knob to set up the air density to meet you need. Please adjust the suitable air pressure to get best air cushion performance. Too much air pressure will result jam or bad air cushion performance (Remark: " A" area is suggest for 200mm width film and " B" area is suggest for 400mm width film).
2.3.5 If continuous to using the machine, press the start/pause button when machine indicator is in solid on condition. If press stop button more than 30 seconds may cause film melt out a small hole, it is normal situation and will not effect air cushion, you can tear off and releace film from hot roller to prevent from melted film hole.
2.3.6 If want to power off, please make sure power indicator is in solid on condition, tear off the film performation line ahead the air nozzle, and push start/pause.
2.3.7 As for transportation requirement, please ensure the rollers without film inside button to eject the film completely, and push the start/pause button again to stop the machine, then you can turn off the power stwitch.than push power button to turn off the machine while the rollers are still running.
